Pzkpfw III M Schurzen
The Panzerkampfwagen III Ausf. M with Schürzen was a late-production German medium tank combining the long-barrelled 5 cm gun with improved wading equipment and spaced armour skirts. It served with German armoured forces during the Second World War as the Panzer III's role as a principal battle tank was drawing to a close.
Historical references: History of War: Panzerkampfwagen III Ausf. M and Quartermaster Section: Panzer III Ausf. M technical data.
Design and Bodywork
- Chassis and manufacture: The Ausf. M continued the established Panzer III chassis, with production associated with MAN, MNH, MIAG and Wegmann. Six road wheels per side and torsion-bar suspension distinguished its running gear.
- Schürzen configuration: Thin spaced armour panels surrounded the hull sides and turret, giving skirt-equipped vehicles a broader outline than the unskirted tank. This listing represents that skirted configuration rather than the standard unskirted Ausf. M.
- Internal layout: The driver and radio operator occupied the forward hull, while the commander, gunner and loader worked in the rotating turret. The engine occupied the rear compartment.
- Access and wading changes: The Ausf. M incorporated improved sealing and a modified exhaust for water crossings. Hull-side escape hatches were eliminated, making the remaining crew hatches particularly important for access and evacuation.
Technical Specifications
The following specifications describe the full-size historical vehicle, not the miniature. Figures vary with equipment and source.
- Engine: Maybach HL 120 TRM petrol V12, approximately 11.9 litres displacement, rated at about 300 metric horsepower.
- Transmission: Six forward gears and one reverse gear, transmitting power to the tracked running gear.
- Running gear: Torsion-bar suspension with six paired road wheels and three return rollers on each side, front drive sprockets and rear idlers.
- Fuel and range: Approximately 320 litres (85 US gallons) of petrol, with a nominal road range of around 155 km (96 miles), depending on terrain and operating conditions.
- Speed: Maximum road speed approximately 40 km/h (25 mph); cross-country travel was substantially slower.
- Dimensions and weight: Approximately 6.41 m (21 ft) long including the gun, 2.95 m (9 ft 8 in) wide before skirts, and 2.50 m (8 ft 2 in) high. Skirts increased overall width; combat weight is commonly listed at approximately 22.7 tonnes, with figures dependent on configuration.
Capacity & Utility
- Main armament: A long-barrelled 5 cm KwK 39 L/60 tank gun provided the principal armament. Ammunition was carried within the fighting compartment; published stowage totals differ between references.
- Secondary weapons: Two 7.92 mm MG 34 machine guns were carried in the standard coaxial and bow positions, supporting the main gun and providing close-range fire.
- Equipment and stowage: FuG 5 radio equipment supported communication within armoured formations. Gun ammunition, machine-gun ammunition and crew equipment shared the confined hull and turret interior.
- Crew: Five men divided driving, radio operation, gunnery, loading and command duties. The three-man turret allowed the commander to direct the vehicle without also loading or aiming the main gun.
Wartime Legacy
- Production: A commonly cited total is approximately 250 gun-armed Ausf. M tanks completed between October 1942 and February 1943, with MAN, MNH, MIAG and Wegmann associated with the variant. This is not a separate count of skirt-equipped tanks; other chassis from the wider programme were diverted to different uses.
- Service: Ausf. M tanks replaced front-line losses and served at Kursk and in the defence of Sicily in 1943. Their long 5 cm gun was increasingly inadequate against newer enemy tanks, illustrating the limits of further development of the Panzer III as a gun tank.
Model information: Made to order in your selected scale. Choose one scale from the dropdown; all scales are not included. The 1/285 (3-Pack) option contains three models; other scale selections are individual models.
Designer: M Bergman
Manufacturer: S&C Foundry
Associated Army: Germany
Era: WWII
Product features: Printed with high-quality ABS-like gray resin.
This is a 3D-printed product and may have minor imperfections. Some assembly and removal of print supports may be required.