Pzkpfw III N Schurzen
The Panzerkampfwagen III Ausf. N with Schürzen was a German Second World War close-support tank armed with the short-barrelled 7.5 cm KwK 37 L/24. Its armour skirts and larger-calibre support gun distinguished this late configuration from the long-barrelled 5 cm Panzer III variants.
Historical references: World War Photos: Panzer III Ausf. N and War Drawings: Panzer III Ausf. N technical data.
Design and Bodywork
- Chassis and manufacture: The Ausf. N used the established Panzer III chassis rather than a wholly new hull design. Vehicles were completed on J, L and M chassis, with manufacturers including Henschel, Wegmann, MNH, MIAG and MAN associated with the programme.
- Skirted configuration: Schürzen comprised thin spaced armour panels carried outside the hull sides and around the turret. This model represents the skirt-equipped configuration; not every Ausf. N had the same external fittings.
- Fighting-compartment layout: The engine remained at the rear, with the driver and radio operator in the forward hull and a three-man turret above the central fighting compartment. Internal ammunition stowage was adapted for the larger 7.5 cm rounds.
- Crew access: The commander's cupola and turret-side hatches provided access to the turret, while the forward hull crew used their own roof hatches. Hatch and cupola details varied with chassis origin and production period.
Technical Specifications
These figures describe the full-size historical vehicle, not the miniature. Dimensions and equipment varied with the underlying chassis and fittings.
- Engine: Maybach HL 120 TRM liquid-cooled petrol V12, approximately 11.9 litres (724 cubic inches), developing about 300 metric horsepower at 3,000 rpm.
- Transmission: ZF SSG 77 gearbox with six forward gears and one reverse gear, driving the tracks through the front final drives.
- Running gear: Torsion-bar suspension with six paired road wheels per side, three return rollers, front drive sprockets and rear idlers. Standard track width was approximately 400 mm (15.7 in).
- Fuel and range: Approximately 320 litres (85 US gallons) of petrol; nominal range around 155 km (96 miles) on roads and approximately 95 km (59 miles) off-road, depending on conditions.
- Speed: Maximum road speed approximately 40 km/h (25 mph), with substantially lower practical speeds across broken ground.
- Dimensions and mass: Length approximately 5.5–5.74 m (18–18.8 ft), depending on chassis; basic hull width around 2.95 m (9 ft 8 in), increasing to roughly 3.41 m (11 ft 2 in) with skirts. Height was about 2.50 m (8 ft 2 in), with combat mass approximately 23 metric tonnes.
Capacity & Utility
- Main armament: The short 7.5 cm KwK 37 L/24 provided high-explosive fire for close support, replacing the long 5 cm gun fitted to contemporary gun-tank versions of the Panzer III.
- Ammunition and secondary weapons: Published main-gun stowage figures range from 56 rounds on L-based vehicles to 64 on M-based vehicles. Two 7.92 mm MG 34 machine guns occupied the coaxial and bow positions.
- Internal equipment: Revised ammunition racks accommodated the larger rounds within the existing fighting compartment. Radio equipment supported coordination with other armoured vehicles and the troops they supported.
- Crew duties: Five crew members served as commander, gunner, loader, driver and radio operator/bow machine-gunner. The three-man turret separated observation and command from aiming and loading duties.
Wartime Legacy
- Production: The Ausf. N programme ran during 1942–1943, with commonly cited totals of 663 vehicles on J, L and M chassis plus 37 later conversions of older tanks. Manufacturers associated with the programme included Henschel, Wegmann, MNH, MIAG and MAN; these totals describe the Ausf. N programme, not a separately established count of skirt-equipped vehicles.
- Service and significance: German forces used the Ausf. N for close support, including service alongside Tiger tanks in heavy tank battalions. Its short 7.5 cm gun emphasized support against infantry and field positions rather than the long-range anti-tank role, extending the usefulness of the Panzer III chassis as heavier enemy armour outgrew its earlier gun armament.
Model information: Made to order in your selected scale. Choose one scale from the dropdown; all scales are not included. The 1/285 (3-Pack) option contains three models; other scale selections are individual models.
Designer: M Bergman
Manufacturer: S&C Foundry
Associated Army: Germany
Era: WWII
Product features: Printed with high-quality ABS-like gray resin.
This is a 3D-printed product and may have minor imperfections. Some assembly and removal of print supports may be required.